MenuSearch | Country: Luxembourg | Currency: EUR
Ceramique 2.5g, Premium High-Density Thermal Compound
Discontinued
More variations available Show

Arctic Silver Ceramique 2.5g, Premium High-Density Thermal Compound

High-Density ceramic content:

Ceramique uses a high-density layered composite of five unique shapes of thermally conductive aluminium oxide, boron nitride and zinc oxide sub-micron particles to maximise particle-to-particle contact area and thermal transfer. This exclusive combination provides performance exceeding most metal based compounds.

Controlled Triple-Phase Viscosity:

Ceramique does not contain any silicone. The suspension fluid is a proprietary mixture of advanced polysynthetic oils that provide superior performance and long-term stability.

During the system’s initial use, the heat from the CPU lowers the viscosity of the compound to enhance the filling of the microscopic valleys and ensure a minimum bond line between the heatsink and the CPU core. Then the compound thickens slightly over the next 100 to 300 hours of use to its final consistency designed for long-term stability.

PLEASE NOTE: This should not be confused with conventional phase change pads that are pre-attached to many heatsinks. Those pads melt each time they get hot then re-solidify when they cool. The viscosity changes that Ceramique goes through are much more subtle and ultimately much more effective.

Excellent Stability:

Ceramique is engineered to not separate, run, migrate, or bleed.

Electrical Insulator:

Ceramique does not contain any metal or other electrically conductive materials. It is a pure electrical insulator, neither electrically conductive nor capacitive.

Performance:

2 to 10 degrees centigrade lower CPU full load core temperatures than standard thermal compounds or thermal pads when measured with a calibrated thermal diode embedded in the CPU core.

Easy Clean Up:

Ceramique can easily be cleaned from CPUs and heatsinks with isopropyl alcohol or any of the cleaners listed in the product instructions.

Innovative Dispenser:

The 2.5-gram Ceramique is the first product available in our proprietary thermal compound syringe. Our new syringe is more compact, easier to handle and dispenses a higher percentage of its content than standard industrial or medical syringes. The amount of compound remaining in the syringe is easy to determine as the rear of the plunger is perfectly flush with the flange when the syringe is empty.

Features

  1. Excellent value for money
  2. Does not separate, run, migrate or bleed
  3. Made from non-conductive materials
SpecificationsCeramique 2.5g
Thermal Resistance<0.007°C-in2/Watt (0.001 inch layer)
Thermal Conductance
200,000W/m2.°C (0.001 inch layer)
Average Particle Size<0.38 microns <0.000015 inch (67 particles lined up in a row equal 1/1000th of an inch)
Temperature limitsPeak: –150°C to >180°C Long-Term: –150°C to 125°C
Coverage Area2.5-gram syringes. (About 1cc) At a layer 0.003” thick, one tube will cover approximately 20 square inches
Warranty24 months
EAN barcode0832199002011
SpecificationsCeramique 2.5g
Thermal Resistance<0.007°C-in2/Watt (0.001 inch layer)
Thermal Conductance
200,000W/m2.°C (0.001 inch layer)
Average Particle Size<0.38 microns <0.000015 inch (67 particles lined up in a row equal 1/1000th of an inch)
Temperature limitsPeak: –150°C to >180°C Long-Term: –150°C to 125°C
Coverage Area2.5-gram syringes. (About 1cc) At a layer 0.003” thick, one tube will cover approximately 20 square inches
Warranty24 months
EAN barcode0832199002011

Top CPU Cooling Accessories

Recently Viewed Products